二 電容(Capacitor):

    電容的標示方法較不統一, 一般而言電解質電容的電容量會直接標示在電容上, 有些電容則會用下列代號標示:

    Capacitor value representation method is not standardized. Some types of capacitor will show capacitor value directly in capacitor surface, some others will use below symbols to transmit capacitor value:

    電容的耐壓值(單位: V)

    Maximum voltage to be used(Unit: V)

    電容的電容量(單位: pF)

    Capacitor value(Unit: pF):

    電容的誤差(單位: pF)

    Maximum error(Unit: pF):

    耐壓強度為400 volt

    電容量為10*103 = 10000 pF = 10K pF,

    誤差值為±20% = ±2K pF.

    Maximum used voltage is 400 volt.

    Capacitor value is 10*103 = 10000 pF = 10K pF,

    Maximum error is ±20% = ±2K pF.