[1] ZHOU H, NAEEM M A, LV P, et al. Effect Effect of pore distribution on the lithium storage properties of porous C/SnO2 nanofibers [J]. Journal of Alloys and Compounds, 2017, 711(414-23.

[2] ZHANG J, YANG Q, CAI Y, et al. Fabrication and characterization of electrospun porous cellulose acetate nanofibrous mats incorporated with capric acid as form-stable phase change materials for storing/retrieving thermal energy [J]. International Journal of Green Energy, 2017, 14(12): 1011-9.

[3] ZHANG J, HOU X, PANG Z, et al. Fabrication of hierarchical TiO2 nanofibers by microemulsion electrospinning for photocatalysis applications [J]. Ceramics International, 2017, 43(17): 15911-7.

[4] ZHANG J, CAI Y, HOU X, et al. Fabrication of hierarchically porous TiO2 nanofibers by microemulsion electrospinning and their application as anode material for lithium-ion batteries [J]. Beilstein Journal of Nanotechnology, 2017, 8(1297-306.

[5] ZHANG J, CAI Y, HOU X, et al. Fabrication and Characterization of Porous Cellulose Acetate Films by Breath Figure Incorporated with Capric Acid as Form-stable Phase Change Materials for Storing/Retrieving Thermal Energy [J]. Fibers and Polymers, 2017, 18(2): 253-63.

[6] YUAN X, XU W, HUANG F, et al. Structural colors of fabric from Ag/TiO2 composite films prepared by magnetron sputtering deposition [J]. International Journal of Clothing Science and Technology, 2017, 29(3): 427-35.

[7] SHAO D, GAO Y, CAO K, et al. Rapid surface functionalization of cotton fabrics by modified hydrothermal synthesis of ZnO [J]. Journal of the Textile Institute, 2017, 108(8): 1391-7.

[8] SHA S, JIANG G, CHAPMAN L P, et al. Fast Penetration Resolving for Weft Knitted Fabric Based on Collision Detection [J]. Journal of Engineered Fibers and Fabrics, 2017, 12(1): 50-8.

[9] QIAO H, XIA Z, LIU Y, et al. Sonochemical synthesis and high lithium storage properties of ordered Co/CMK-3 nanocomposites [J]. Applied Surface Science, 2017, 400(492-7.

[10] QIAO H, XIA Z, FEI Y, et al. Electrospinning combined with hydrothermal synthesis and lithium storage properties of ZnFe2O4-graphene composite nanofibers [J]. Ceramics International, 2017, 43(2): 2136-42.

[11] PANG Z, NIE Q, YANG J, et al. Ammonia sensing properties of different polyaniline-based composite nanofibres [J]. Indian Journal of Fibre & Textile Research, 2017, 42(2): 138-44.

[12] PANG Z, NIE Q, WEI A, et al. Effect of In2O3 nanofiber structure on the ammonia sensing performances of In2O3/PANI composite nanofibers [J]. Journal of Materials Science, 2017, 52(2): 686-95.

[13] PANG Z, NIE Q, LV P, et al. Design of flexible PANI-coated CuO-TiO2-SiO2 heterostructure nanofibers with high ammonia sensing response values [J]. Nanotechnology, 2017, 28(22):

[14] LV X, LI G, LI D, et al. A new method to prepare no-binder, integral electrodes-separator, asymmetric all-solid-state flexible supercapacitor derived from bacterial cellulose [J]. Journal of Physics and Chemistry of Solids, 2017, 110(202-10.

[15] LV P, YAO Y, ZHOU H, et al. Synthesis of novel nitrogen-doped carbon dots for highly selective detection of iron ion [J]. Nanotechnology, 2017, 28(16):

[16] LV P, YAO Y, LI D, et al. Self-assembly of nitrogen-doped carbon dots anchored on bacterial cellulose and their application in iron ion detection [J]. Carbohydrate Polymers, 2017, 172(93-101.

[17] LUO L, QIAO H, XU W, et al. Tin nanoparticles embedded in ordered mesoporous carbon as high-performance anode for sodium-ion batteries [J]. Journal of Solid State Electrochemistry, 2017, 21(5): 1385-95.

[18] LUO L, LI D, ZANG J, et al. Carbon-Coated Magnesium Ferrite Nanofibers for Lithium-Ion Battery Anodes with Enhanced Cycling Performance [J]. Energy Technology, 2017, 5(8): 1364-72.

[19] LU H, WANG Q, LI G, et al. Electrospun water-stable zein/ethyl cellulose composite nanofiber and its drug release properties [J]. Materials Science & Engineering C-Materials for Biological Applications, 2017, 74(86-93.

[20] LI G, NANDGAONKAR A G, WANG Q, et al. Laccase-immobilized bacterial cellulose/TiO2 functionalized composite membranes: Evaluation for photo- and bio-catalytic dye degradation [J]. Journal of Membrane Science, 2017, 525(89-98.

[21] LI G, NANDGAONKAR A G, HABIBI Y, et al. An environmentally benign approach to achieving vectorial alignment and high microporosity in bacterial cellulose/chitosan scaffolds [J]. Rsc Advances, 2017, 7(23): 13678-88.

[22] LI G, NANDGAONKAR A G, HABIBI Y, et al. An environmentally benign approach to achieving vectorial alignment and high microporosity in bacterial cellulose/chitosan scaffolds (vol 7, pg 13678, 2017) [J]. Rsc Advances, 2017, 7(27): 16737-.

[23] HUANG X, MENG L, WEI Q, et al. Effect of substrate structures on the morphology and interfacial bonding properties of copper films sputtered on polyester fabrics [J]. International Journal of Clothing Science and Technology, 2017, 29(1): 39-46.

[24] CAI Y, SONG X, LIU M, et al. Flexible cellulose acetate nano-felts absorbed with capric-myristic-stearic acid ternary eutectic mixture as form-stable phase-change materials for thermal energy storage/retrieval [J]. Journal of Thermal Analysis and Calorimetry, 2017, 128(2): 661-73.

[25] CAI Y, HOU X, WANG W, et al. Effects of SiO2 nanoparticles on structure and property of form-stable phase change materials made of cellulose acetate phase inversion membrane absorbed with capric-myristic-stearic acid ternary eutectic mixture [J]. Thermochimica Acta, 2017, 653(49-58.

[26] ZHOU J, WANG Q, LU H, et al. Preparation and Characterization of Electrospun Polyvinyl Alcohol-styrylpyridinium/beta-cyclodextrin Composite Nanofibers: Release Behavior and Potential Use for Wound Dressing [J]. Fibers and Polymers, 2016, 17(11): 1835-41.

[27] ZHOU H, LI Z, NIU X, et al. The enhanced gas-sensing and photocatalytic performance of hollow and hollow core-shell SnO2-based nanofibers induced by the Kirkendall effect [J]. Ceramics International, 2016, 42(1): 1817-26.

[28] ZHOU H, LI Z, NIU X, et al. The enhanced gas-sensing and photocatalytic performance of hollow and hollow core shell SnO2-based nanofibers induced by the Kirkendall effect (vol 42, pg 1817, 2016) [J]. Ceramics International, 2016, 42(6): 7897-.

[29] ZHANG J, SONG M, WANG X, et al. Preparation of a cellulose acetate/organic montmorillonite composite porous ultrafine fiber membrane for enzyme immobilizatione [J]. Journal of Applied Polymer Science, 2016, 133(33):

[30] ZHANG J, SONG M, LI D, et al. Preparation of Self-clustering Highly Oriented Nanofibers by Needleless Electrospinning Methods [J]. Fibers and Polymers, 2016, 17(9): 1414-20.

[31] YUAN X, XU W, HUANG F, et al. Polyester fabric coated with Ag/ZnO composite film by magnetron sputtering [J]. Applied Surface Science, 2016, 390(863-9.

[32] YUAN X, WEI Q, CHEN D, et al. Electrical and optical properties of polyester fabric coated with Ag/TiO2 composite films by magnetron sputtering [J]. Textile Research Journal, 2016, 86(8): 887-94.

[33] YU J, ZHOU T, PANG Z, et al. Flame retardancy and conductive properties of polyester fabrics coated with polyaniline [J]. Textile Research Journal, 2016, 86(11): 1171-9.

[34] YANG J, LI D, PANG Z, et al. Laccase Biosensor Based on Ag-Doped TiO2 Nanoparticles on CuCNFs for the Determination of Hydroquinone [J]. Nano, 2016, 11(12):

[35] YANG J, LI D, FU J, et al. TiO2-CuCNFs based laccase biosensor for enhanced electrocatalysis in hydroquinone detection [J]. Journal of Electroanalytical Chemistry, 2016, 766(16-23.

[36] WANG X, WANG Q, HUANG F, et al. The Morphology of Taylor Cone Influenced by Different Coaxial Composite Nozzle Structures [J]. Fibers and Polymers, 2016, 17(4): 624-9.

[37] QIU Y, QIU L, CUI J, et al. Bacterial cellulose and bacterial cellulose-vaccarin membranes for wound healing [J]. Materials Science & Engineering C-Materials for Biological Applications, 2016, 59(303-9.

[38] QIAO H, FEI Y, CHEN K, et al. Electrospun synthesis and electrochemical property of zinc ferrite nanofibers [J]. Ionics, 2016, 22(6): 967-74.

[39] PANG Z, YANG Z, CHEN Y, et al. A room temperature ammonia gas sensor based on cellulose/TiO2/PANI composite nanofibers [J]. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 2016, 494(248-55.

[40] NIE Q, PANG Z, LU H, et al. Ammonia gas sensors based on In2O3/PANI hetero-nanofibers operating at room temperature [J]. Beilstein Journal of Nanotechnology, 2016, 7(1312-21.

[41] NARH C, LI G, WANG Q, et al. Sulfanilic acid inspired self-assembled fibrous materials [J]. Colloid and Polymer Science, 2016, 294(9): 1483-94.

[42] LV P, XU W, LI D, et al. Metal-based bacterial cellulose of sandwich nanomaterials for anti-oxidation electromagnetic interference shielding [J]. Materials & Design, 2016, 112(374-82.

[43] LV P, WEI A, WANG Y, et al. Copper nanoparticles-sputtered bacterial cellulose nanocomposites displaying enhanced electromagnetic shielding, thermal, conduction, and mechanical properties [J]. Cellulose, 2016, 23(5): 3117-27.

[44] LV P, FENG Q, WANG Q, et al. Biosynthesis of Bacterial Cellulose/Carboxylic Multi-Walled Carbon Nanotubes for Enzymatic Biofuel Cell Application [J]. Materials, 2016, 9(3):

[45] LV P, FENG Q, WANG Q, et al. Preparation of Bacterial Cellulose/Carbon Nanotube Nanocomposite for Biological Fuel Cell [J]. Fibers and Polymers, 2016, 17(11): 1858-65.

[46] LUO L, XU W, XIA Z, et al. Electrospun ZnO-SnO2 composite nanofibers with enhanced electrochemical performance as lithium-ion anodes [J]. Ceramics International, 2016, 42(9): 10826-32.

[47] LI W, LIU X, LIU C, et al. Preparation and Characterisation of High Count Yak Wool Yarns Spun by Complete Compacting Spinning and Fabrics Knitted from them [J]. Fibres & Textiles in Eastern Europe, 2016, 24(1): 30-5.

[48] LI G, WANG Q, LV P, et al. Bioremediation of Dyes Using Ultrafine Membrane Prepared from the Waste Culture of Ganoderma lucidum with in-situ Immobilization of Laccase [J]. Bioresources, 2016, 11(4): 9162-74.

[49] LI G, SUN K, LI D, et al. Biosensor based on bacterial cellulose-Au nanoparticles electrode modified with laccase for hydroquinone detection [J]. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 2016, 509(408-14.

[50] LI G, NANDGAONKAR A G, LU K, et al. Laccase immobilized on PAN/O-MMT composite nanofibers support for substrate bioremediation: a de novo adsorption and biocatalytic synergy [J]. Rsc Advances, 2016, 6(47): 41420-7.

[51] LI D, ZANG J, ZHANG J, et al. Sol-Gel Synthesis of Carbon Xerogel-ZnO Composite for Detection of Catechol [J]. Materials, 2016, 9(4):

[52] LI D, AO K, WANG Q, et al. Preparation of Pd/Bacterial Cellulose Hybrid Nanofibers for Dopamine Detection [J]. Molecules, 2016, 21(5):

[53] KE H, PANG Z, PENG B, et al. Thermal energy storage and retrieval properties of form-stable phase change nanofibrous mats based on ternary fatty acid eutectics/polyacrylonitrile composite by magnetron sputtering of silver [J]. Journal of Thermal Analysis and Calorimetry, 2016, 123(2): 1293-307.

[54] KE H, GHULAM M U H, LI Y, et al. Ag-coated polyurethane fibers membranes absorbed with quinary fatty acid eutectics solid-liquid phase change materials for storage and retrieval of thermal energy [J]. Renewable Energy, 2016, 99(1-9.

[55] KE H, FELDMAN E, GUZMAN P, et al. Electrospun polystyrene nanofibrous membranes for direct contact membrane distillation [J]. Journal of Membrane Science, 2016, 515(86-97.

[56] HUANG F, LIU W, LI P, et al. Electrochemical Properties of LLTO/Fluoropolymer-Shell Cellulose-Core Fibrous Membrane for Separator of High Performance Lithium-Ion Battery [J]. Materials, 2016, 9(2):

[57] ZONG X, CAI Y, SUN G, et al. Fabrication and characterization of electrospun SiO2 nanofibers absorbed with fatty acid eutectics for thermal energy storage/retrieval [J]. Solar Energy Materials and Solar Cells, 2015, 132(183-90.

[58] ZHENG H, ZHANG J, DU B, et al. Effect of treatment pressure on structures and properties of PMIA fiber in supercritical carbon dioxide fluid [J]. Journal of Applied Polymer Science, 2015, 132(14):

[59] ZHENG H, ZHANG J, DU B, et al. An Investigation for the Performance of Meta-aramid Fiber Blends Treated in Supercritical Carbon Dioxide Fluid [J]. Fibers and Polymers, 2015, 16(5): 1134-41.

[60] XU C, HINKS D, SUN C, et al. Establishment of an activated peroxide system for low-temperature cotton bleaching using N- 4-(triethylammoniomethyl)benzoyl butyrolactam chloride [J]. Carbohydrate Polymers, 2015, 119(71-7.

[61] WANG Q, NANDGAONKAR A, LUCIA L, et al. Enzymatic bio-fuel cells based on bacterial cellulose (BC)/MWCNT/laccase (Lac) and bacterial cellulose/MWCNT/glucose oxidase (GOD) electrodes [J]. Abstracts of Papers of the American Chemical Society, 2015, 249(

[62] WANG H, XU Y, WEI Q. Preparation of bamboo-hat-shaped deposition of a poly(ethylene terephthalate) fiber web by melt-electrospinning [J]. Textile Research Journal, 2015, 85(17): 1838-48.

[63] SIGDEL S, ELBOHY H, GONG J, et al. Dye-Sensitized Solar Cells Based on Porous Hollow Tin Oxide Nanofibers [J]. Ieee Transactions on Electron Devices, 2015, 62(6): 2027-32.

[64] QIAO H, LUO L, CHEN K, et al. Electrospun synthesis and lithium storage properties of magnesium ferrite nanofibers [J]. Electrochimica Acta, 2015, 160(43-9.

[65] QIAO H, CHEN K, LUO L, et al. Sonochemical synthesis and high lithium storage properties of Sn/CMK-3 nanocomposites [J]. Electrochimica Acta, 2015, 165(149-54.

[66] NANDGAONKAR A, WANG Q, KRAUSE W, et al. Photocatalytic and biocatalytic degradation of dye solution using laccase and titanium dioxide loaded on bacterial cellulose [J]. Abstracts of Papers of the American Chemical Society, 2015, 249(

[67] LUO L, QIAO H, CHEN K, et al. Fabrication of electrospun ZnMn2O4 nanofibers as anode material for lithium-ion batteries [J]. Electrochimica Acta, 2015, 177(283-9.

[68] LUO L, FEI Y, CHEN K, et al. Facile synthesis of one-dimensional zinc vanadate nanofibers for high lithium storage anode material [J]. Journal of Alloys and Compounds, 2015, 649(1019-24.

[69] LUO L, CUI R, LIU K, et al. Electrospun preparation and lithium storage properties of NiFe2O4 nanofibers [J]. Ionics, 2015, 21(3): 687-94.

[70] LI W, SU X, ZHANG Y, et al. Evaluation of the Correlation between the Structure and Quality of Compact Blend Yarns [J]. Fibres & Textiles in Eastern Europe, 2015, 23(6): 55-67.

[71] LI D, LV P, ZHU J, et al. NiCu Alloy Nanoparticle-Loaded Carbon Nanofibers for Phenolic Biosensor Applications [J]. Sensors, 2015, 15(11): 29419-33.

[72] LI D, LI G, LV P, et al. Preparation of a graphene-loaded carbon nanofiber composite with enhanced graphitization and conductivity for biosensing applications [J]. Rsc Advances, 2015, 5(39): 30602-9.

[73] HUANG F, XU Y, PENG B, et al. Coaxial Electrospun Cellulose-Core Fluoropolymer-Shell Fibrous Membrane from Recycled Cigarette Filter as Separator for High Performance Lithium-Ion Battery [J]. Acs Sustainable Chemistry & Engineering, 2015, 3(5): 932-40.

[74] GONG J, QIAO H, SIGDEL S, et al. Characteristics of SnO2 nanofiber/TiO2 nanoparticle composite for dye-sensitized solar cells [J]. Aip Advances, 2015, 5(6):

[75] GAO D, WANG L, WANG C, et al. Electrospinning of Porous Carbon Nanocomposites for Supercapacitor [J]. Fibers and Polymers, 2015, 16(2): 421-5.

[76] FU J, PANG Z, YANG J, et al. Hydrothermal Growth of Ag-Doped ZnO Nanoparticles on Electrospun Cellulose Nanofibrous Mats for Catechol Detection [J]. Electroanalysis, 2015, 27(6): 1490-7.

[77] FU J, PANG Z, YANG J, et al. Fabrication of polyaniline/carboxymethyl cellulose/cellulose nanofibrous mats and their biosensing application [J]. Applied Surface Science, 2015, 349(35-42.

[78] FU J, LI D, LI G, et al. Carboxymethyl cellulose assisted immobilization of silver nanoparticles onto cellulose nanofibers for the detection of catechol [J]. Journal of Electroanalytical Chemistry, 2015, 738(92-9.

[79] DU B, ZHENG L-J, WEI Q. Screening and identification of Providencia rettgeri for brown alga degradation and anion sodium alginate/poly (vinyl alcohol)/tourmaline fiber preparation [J]. Journal of the Textile Institute, 2015, 106(7): 787-91.

[80] CUI J, QIU L, QIU Y, et al. Co-electrospun nanofibers of PVA-SbQ and Zein for wound healing [J]. Journal of Applied Polymer Science, 2015, 132(39):

[81] CHEN X, LI D, LI G, et al. Facile fabrication of gold nanoparticle on zein ultrafine fibers and their application for catechol biosensor [J]. Applied Surface Science, 2015, 328(444-52.

[82] CAI Y, SUN G, LIU M, et al. Fabrication and characterization of capric lauric palmitic acid/electrospun SiO2 nanofibers composite as form-stable phase change material for thermal energy storage/retrieval [J]. Solar Energy, 2015, 118(87-95.

[83] CAI Y, LIU M, SONG X, et al. A form-stable phase change material made with a cellulose acetate nanofibrous mat from bicomponent electrospinning and incorporated capric-myristic-stearic acid ternary eutectic mixture for thermal energy storage/retrieval [J]. Rsc Advances, 2015, 5(102): 84245-51.

[84] ZHANG P, WANG Q, ZHANG J, et al. Preparation of Amidoxime-modified Polyacrylonitrile Nanofibers Immobilized with Laccase for Dye Degradation [J]. Fibers and Polymers, 2014, 15(1): 30-4.

[85] XIA X, WANG X, ZHOU H, et al. The effects of electrospinning parameters on coaxial Sn/C nanofibers: Morphology and lithium storage performance [J]. Electrochimica Acta, 2014, 121(345-51.

[86] WANG Q, NANDGAONKAR A G, CUI J, et al. Atom efficient thermal and photocuring combined treatments for the synthesis of novel eco-friendly grid-like zein nanofibres [J]. Rsc Advances, 2014, 4(106): 61573-9.

[87] WANG Q, LI G, ZHANG J, et al. PAN Nanofibers Reinforced with MMT/GO Hybrid Nanofillers [J]. Journal of Nanomaterials, 2014,

[88] WANG Q, CUI J, LI G, et al. Laccase Immobilized on a PAN/Adsorbents Composite Nanofibrous Membrane for Catechol Treatment by a Biocatalysis/Adsorption Process [J]. Molecules, 2014, 19(3): 3376-88.

[89] WANG Q, CUI J, LI G, et al. Laccase Immobilization by Chelated Metal Ion Coordination Chemistry [J]. Polymers, 2014, 6(9): 2357-70.

[90] PANG Z, FU J, LV P, et al. Effect of CSA Concentration on the Ammonia Sensing Properties of CSA-Doped PA6/PANI Composite Nanofibers [J]. Sensors, 2014, 14(11): 21453-65.

[91] PANG Z, FU J, LUO L, et al. Fabrication of PA6/TiO2/PANI composite nanofibers by electrospinning-electrospraying for ammonia sensor [J]. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 2014, 461(113-8.

[92] NANDGAONKAR A G, WANG Q, FU K, et al. A one-pot biosynthesis of reduced graphene oxide (RGO)/bacterial cellulose (BC) nanocomposites [J]. Green Chemistry, 2014, 16(6): 3195-201.

[93] MENG L, WEI Q, LI Y, et al. Effects of plasma pre-treatment on surface properties of fabric sputtered with copper [J]. International Journal of Clothing Science and Technology, 2014, 26(1): 96-104.

[94] LUO L, CUI R, QIAO H, et al. High lithium electroactivity of electrospun CuFe2O4 nanofibers as anode material for lithium-ion batteries [J]. Electrochimica Acta, 2014, 144(85-91.

[95] LI X-J, WEI Q, WANG X. Preparation of magnetic polyimide/maghemite nanocomposite fibers by electrospinning [J]. High Performance Polymers, 2014, 26(7): 810-6.

[96] LI X, WANG X, WANG Q, et al. Effects of Imidization Temperature on the Structure and Properties of Electrospun Polyimide Nanofibers [J]. Journal of Engineered Fibers and Fabrics, 2014, 9(4): 33-8.

[97] LI D, YANG J, ZHOU J, et al. Direct electrochemistry of laccase and a hydroquinone biosensing application employing ZnO loaded carbon nanofibers [J]. Rsc Advances, 2014, 4(106): 61831-40.

[98] LI D, PANG Z, CHEN X, et al. A catechol biosensor based on electrospun carbon nanofibers [J]. Beilstein Journal of Nanotechnology, 2014, 5(346-54.

[99] LI D, LUO L, PANG Z, et al. Novel Phenolic Biosensor Based on a Magnetic Polydopamine-Laccase-Nickel Nanoparticle Loaded Carbon Nanofiber Composite [J]. Acs Applied Materials & Interfaces, 2014, 6(7): 5144-51.

[100] LI D, LUO L, PANG Z, et al. Amperometric detection of hydrogen peroxide using a nanofibrous membrane sputtered with silver [J]. Rsc Advances, 2014, 4(8): 3857-63.

[101] KE H, PANG Z, XU Y, et al. Graphene oxide improved thermal and mechanical properties of electrospun methyl stearate/polyacrylonitrile form-stable phase change composite nanofibers [J]. Journal of Thermal Analysis and Calorimetry, 2014, 117(1): 109-22.

[102] KASAUDHAN R, ELBOHY H, SIGDEL S, et al. Incorporation of TiO2 Nanoparticles Into SnO2 Nanofibers for Higher Efficiency Dye-Sensitized Solar Cells [J]. Ieee Electron Device Letters, 2014, 35(5): 578-80.

[103] HUANG X, MENG L, WEI Q, et al. Morphology and properties of nanoscale copper films deposited on polyester substrates [J]. International Journal of Clothing Science and Technology, 2014, 26(5): 367-76.

[104] GAO D, WANG L, YU J, et al. Preparation and Characterization of Porous Carbon Based Nanocomposite for Supercapacitor [J]. Fibers and Polymers, 2014, 15(6): 1236-41.

[105] FU J, QIAO H, LI D, et al. Laccase Biosensor Based on Electrospun Copper/Carbon Composite Nanofibers for Catechol Detection [J]. Sensors, 2014, 14(2): 3543-56.

[106] FENG Q, ZHAO Y, WEI A, et al. Immobilization of Catalase on Electrospun PVA/PA6-Cu(II) Nanofibrous Membrane for the Development of Efficient and Reusable Enzyme Membrane Reactor [J]. Environmental Science & Technology, 2014, 48(17): 10390-7.

[107] FENG Q, WEI Q, HOU D, et al. Preparation of Amidoxime Polyacrylonitrile Nanofibrous Membranes and Their Applications in Enzymatic Membrane Reactor [J]. Journal of Engineered Fibers and Fabrics, 2014, 9(2): 146-52.

[108] DUAN F, ZHANG Q, WEI Q, et al. Control of Photocatalytic Property of Bismuth-Based Semiconductor Photocatalysts [J]. Progress in Chemistry, 2014, 26(1): 30-40.

[109] CUI J, WANG Q, CHEN X, et al. A novel material of cross-linked styrylpyridinium salt intercalated montmorillonite for drug delivery [J]. Nanoscale Research Letters, 2014, 9(

[110] CAI Y, ZONG X, ZHANG J, et al. THE IMPROVEMENT OF THERMAL STABILITY AND CONDUCTIVITY VIA INCORPORATION OF CARBON NANOFIBERS INTO ELECTROSPUN ULTRAFINE COMPOSITE FIBERS OF LAURIC ACID/POLYAMIDE 6 PHASE CHANGE MATERIALS FOR THERMAL ENERGY STORAGE [J]. International Journal of Green Energy, 2014, 11(8): 861-75.

[111] XIA X, LI S, WANG X, et al. Structures and properties of SnO2 nanofibers derived from two different polymer intermediates [J]. Journal of Materials Science, 2013, 48(9): 3378-85.

[112] WANG X, LI S, WANG H, et al. Progress in Research of Melt-electrospinning [J]. Polymer Bulletin, 2013, 7): 15-26.

[113] WANG X, HE T, LI D, et al. Electromagnetic properties of hollow PAN/Fe3O4 composite nanofibres via coaxial electrospinning [J]. International Journal of Materials & Product Technology, 2013, 46(2-3): 95-105.

[114] WANG Q, PENG L, LI G, et al. Activity of Laccase Immobilized on TiO2-Montmorillonite Complexes [J]. International Journal of Molecular Sciences, 2013, 14(6): 12520-32.

[115] WANG Q, PENG L, DU Y, et al. Fabrication of hydrophilic nanoporous PMMA/O-MMT composite microfibrous membrane and its use in enzyme immobilization [J]. Journal of Porous Materials, 2013, 20(3): 457-64.

[116] WANG Q, DU Y, FENG Q, et al. Nanostructures and Surface Nanomechanical Properties of Polyacrylonitrile/Graphene Oxide Composite Nanofibers by Electrospinning [J]. Journal of Applied Polymer Science, 2013, 128(2): 1152-7.

[117] SHAO D, WEI Q, TAO L, et al. PREPARATION AND CHARACTERIZATION OF PET NONWOVEN COATED WITH ZnO-Ag BY ONE-POT HYDROTHERMAL TECHNIQUES [J]. Tekstil Ve Konfeksiyon, 2013, 23(4): 338-41.

[118] QIAO H, YAO D, CAI Y, et al. One-pot synthesis and electrochemical property of MnO/C hybrid microspheres [J]. Ionics, 2013, 19(4): 595-600.

[119] LIU H, CHEN D, WEI Q, et al. An investigation into the bust girth range of pressure comfort garment based on elastic sports vest [J]. Journal of the Textile Institute, 2013, 104(2): 223-30.

[120] LI D, PANG Z, WANG Q, et al. Fabrication and Characterization of Polyamide6-room Temperature Ionic Liquid (PA6-RTIL) Composite Nanofibers by Electrospinning [J]. Fibers and Polymers, 2013, 14(10): 1614-9.

[121] KUMAR D N T, WEI Q. Analysis of Quantum Dots for Nano-Bio applications as the Technological Platform of the Future [J]. Research Journal of Biotechnology, 2013, 8(5): 78-82.

[122] KE H, LI D, ZHANG H, et al. Electrospun Form-stable Phase Change Composite Nanofibers Consisting of Capric Acid-based Binary Fatty Acid Eutectics and Polyethylene Terephthalate [J]. Fibers and Polymers, 2013, 14(1): 89-99.

[123] KE H, LI D, WANG X, et al. Thermal and mechanical properties of nanofibers-based form-stable PCMs consisting of glycerol monostearate and polyethylene terephthalate [J]. Journal of Thermal Analysis and Calorimetry, 2013, 114(1): 101-11.

[124] KE H, CAI Y, WEI Q, et al. Electrospun ultrafine composite fibers of binary fatty acid eutectics and polyethylene terephthalate as innovative form-stable phase change materials for storage and retrieval of thermal energy [J]. International Journal of Energy Research, 2013, 37(6): 657-64.

[125] HUANG F, ZHANG H, WEI Q, et al. Preparation and characterization of PVDF nanofibrous membrane containing bimetals for synergistic dechlorination of trichloromethane [J]. Abstracts of Papers of the American Chemical Society, 2013, 246(

[126] HUANG F, XU Y, LIAO S, et al. Preparation of Amidoxime Polyacrylonitrile Chelating Nanofibers and Their Application for Adsorption of Metal Ions [J]. Materials, 2013, 6(3): 969-80.

[127] GAO D, WANG L, XIA X, et al. Preparation and Characterization of porous Carbon/Nickel Nanofibers for Supercapacitor [J]. Journal of Engineered Fibers and Fabrics, 2013, 8(4): 108-13.

[128] FENG Q, WANG Q, TANG B, et al. Immobilization of catalases on amidoxime polyacrylonitrile nanofibrous membranes [J]. Polymer International, 2013, 62(2): 251-6.

[129] CAI Y, ZONG X, ZHANG J, et al. Electrospun nanofibrous mats absorbed with fatty acid eutectics as an innovative type of form-stable phase change materials for storage and retrieval of thermal energy [J]. Solar Energy Materials and Solar Cells, 2013, 109(160-8.

[130] CAI Y, ZONG X, BAN H, et al. Fabrication, Structural Morphology and Thermal Energy Storage/Retrieval of Ultrafine Phase Change Fibres Consisting of Polyethylene Glycol and Polyamide 6 by Electrospinning [J]. Polymers & Polymer Composites, 2013, 21(8): 525-32.

[131] CAI Y, GAO C, ZHANG T, et al. Influences of expanded graphite on structural morphology and thermal performance of composite phase change materials consisting of fatty acid eutectics and electrospun PA6 nanofibrous mats [J]. Renewable Energy, 2013, 57(163-70.

[1]張權,董建成,陳亞君,王清清,魏取福.水熱反應溫度對PMMA/TiO_2復合納米纖維膜的形貌和性能的影響[J].材料科學與工程學報,2017,(05):785-789.

[2]周建波,盧杭詣,張權,代雅軒,王清清,魏取福.醋纖基載藥納米纖維膜制備及藥物緩釋行為研究[J].化工新型材料,2017,45(10):223-225.

[3]盛澄成,徐陽,魏取福,喬輝.Cu/Al_2O_3復合薄膜的制備及其抗氧化性能[J].材料科學與工程學報,2017,35(04):596-599+606.

[4]張金寧,何慢,陳昀,曹建華,楊占平,宋明玉,魏取福.二醋酸纖維/OMMT復合增強納米纖維膜及其過濾性能研究[J].化工新型材料,2017,45(08):84-86.

[5]周建波,盧杭詣,張權,王清清,魏取福.CA/β-CD復合納米纖維的制備與表征研究[J].化工新型材料,2017,45(07):244-246.

[6]敖克龍,李大偉,呂鵬飛,王清清,魏取福.載鈀細菌纖維素納米纖維的制備及表征[J].化工新型材料,2017,45(07):214-216.

[7]盛澄成,徐陽,魏取福,喬輝.雙面結構電磁屏蔽材料的制備及抗氧化性能研究[J].化工新型材料,2017,45(07):57-59.

[8]劉文婷,寧景霞,李沛贏,魏取福,黃鋒林.PVDF-HFP/LLTO復合鋰離子電池隔膜的電化學性能研究[J].化工新型材料,2017,45(07):50-53.

[9]邱玉宇,蔡維維,邱麗穎,王清清,魏取福.負載王不留行黃酮苷納米纖維作為創傷敷料的研究[J].生物醫學工程學雜志,2017,34(03):394-400.

[10]俞儉,李祥濤,高大偉,劉麗,魏取福,林洪芹.木棉/棉混紡機織物的服用性能[J].絲綢,2017,54(06):22-26.

[11]盛澄成,徐陽,魏取福.層狀復合電磁屏蔽材料的制備及性能研究[J].化工新型材料,2017,45(05):61-63.

[12]張權,董建成,馬夢琴,王清清,魏取福.柔性PMMA/TiO_2復合超細纖維的制備及表征[J].化工新型材料,2017,45(05):90-92.

[13]張金寧,宋明玉,王小宇,陳昀,曹建華,楊占平,魏取福.多孔二醋酸超細纖維膜的固定化酶及染料降解性能[J].化工新型材料,2017,45(05):173-175.

[14]高大偉,王春霞,林洪芹,魏取福,李偉偉,陸逸群,姜宇.二氧化鈦納米管的制備及其光催化性能[J].紡織學報,2017,38(04):22-26.

[15]柯惠珍,李永貴,王建剛,袁小紅,陳東生,魏取福.磁控濺射法提高定型相變材料的儲熱和放熱速率[J].功能材料,2017,48(03):3163-3167.

[16]張權,代雅軒,馬夢琴,王清清,魏取福.光敏抗菌型靜電紡丙烯酸甲酯/丙烯酸納米纖維的制備及其性能表征[J].紡織學報,2017,38(03):18-22.

[17]張金寧,宋明玉,何慢,陳昀,曹建華,楊占平,魏取福.多孔超細醋酸纖維/滌綸非織造布復合濾材的制備及性能[J].高分子材料科學與工程,2017,33(02):117-122.

[18]王小宇,吳潔茹,何慢,王亞柏,邵興賢,張金寧,魏取福.多孔二醋酸纖維復合材料的制備及其過濾性能研究[J].上海紡織科技,2017,45(02):8-10+21.

[19]張權,李深,王清清,魏取福.甲基丙烯酸甲酯/甲基丙烯酸共聚物光敏抗菌型納米纖維膜的制備及其性能表征[J].紡織學報,2017,38(02):1-6.

[20]王宏,逄增媛,陳程,徐陽,魏取福.熔體靜電紡水溶液接收法制備三維自組裝PET纖維膜[J].化工新型材料,2016,44(11):181-182+186.

[21]蔡以兵,喬輝,王樹根,王鴻博,魏取福.輕化工程專業學科平臺課和專業核心課教學方法研究[J].教育教學論壇,2016,(45):199-200.

[22]彭斌,劉文婷,蘇揚帆,李雙雙,黃婕妤,王怡婷,黃鋒林,魏取福.聚丙烯超疏水纖維膜的制備及其在油水分離中的應用[J].化工新型材料,2016,44(10):227-229+232.

[23]劉盟盟,黃聰,谷瀅,蔡以兵,魏取福,劉偉.納米SiO_2對醋酸纖維素相轉化膜的結構及吸附脫色性能的影響[J].化工新型材料,2016,44(09):184-186.

[24]劉亞芝,陳克,蔡以兵,喬輝,劉偉,魏取福.電紡ZnMn_2O_4納米纖維的制備及其電化學性能研究[J].化工新型材料,2016,44(09):136-138.

[25]吳潔茹,王小宇,何慢,王亞柏,魏取福.多孔蒙脫土二醋酸纖維的制備與性能表征[J].棉紡織技術,2016,44(09):21-24.

[26]盛澄成,徐陽,喬輝,魏取福.ZnO/Cu多層膜的制備及電磁屏蔽性能研究[J].功能材料,2016,47(08):8089-8093.

[27]盧杭詣,崔靜,王清清,魏取福.載藥同軸靜電紡玉米醇溶蛋白/聚乙烯醇-苯乙烯基吡啶鹽縮合物復合納米纖維的制備及性能[J].高分子材料科學與工程,2016,32(08):131-136.

[28]張金寧,宋明玉,王小宇,邵興賢,徐陽,魏取福.二醋酸纖維素多孔超細纖維的制備研究[J].化工新型材料,2016,44(08):196-198.

[29]徐文正,魏取福,楊莉,魏安方,鳳權.磁控濺射玄武巖纖維基納米Cu薄膜微觀結構分析的研究[J].化工新型材料,2016,44(07):136-138+142.

[30]崔靜,邱玉宇,盧杭詣,聶清欣,魏取福.共混與同軸靜電紡載藥納米纖維的制備、表征及比較[J].功能材料,2016,47(04):4055-4059.

[31]王曉玲,逄增媛,李大偉,魏取福,黃鋒林.Eu~(3+)摻雜In_2O_3納米纖維的制備及其發光性能研究[J].稀土,2016,37(02):38-43.

[32]喬輝,蔡以兵,王樹根,魏取福.輕化工程專業卓越工程人才培養模式探討[J].教育教學論壇,2016,(14):179-180.

[33]王靜,王清清,魏取福,黃機質.PVA-SbQ/細菌纖維素復合氣凝膠的制備及吸油性能研究[J].功能材料,2016,47(03):3007-3010.

[34]王宏,杜澤靜,顏奧林,徐陽,魏取福.熔體靜電紡的電場分布對三維自組裝聚對苯二甲酸乙二酯纖維膜形貌的影響[J].高分子材料科學與工程,2016,32(02):126-132.

[35]劉盟盟,蔡以兵,徐陽,魏取福,劉偉,劉慶年.蒙脫土的有機改性及其熔紡聚乳酸復合長絲的結構形貌與性能[J].化工新型材料,2016,44(02):198-200+203.

[36]王靜,王清清,楊廣玉,黃婕妤,魏取福,黃機質.聚乙烯醇-苯乙烯基吡啶鹽縮合物/細菌纖維素復合多孔材料的制備與表征[J].高分子材料科學與工程,2015,31(12):126-130.

[37]崔靜,盧杭詣,聶清欣,王清清,魏取福.靜電紡玉米醇溶蛋白納米纖維及其藥物緩釋行為[J].現代化工,2015,35(12):52-55.

[38]崔靜,張平,王清清,魏取福.固定漆酶對對苯二酚的降解研究[J].化工新型材料,2015,43(12):181-183.

[39]高大偉,王麗麗,陸振乾,王春霞,魏取福,付文秀,陸逸群.金屬摻雜對碳納米纖維結構及導電性能的研究[J].材料導報,2015,29(22):87-90+104.

[40]王宏,徐陽,宋明玉,杜澤靜,魏取福.熔體靜電紡聚對苯二甲酸乙二酯纖維膜分層結構的形成分析[J].高分子材料科學與工程,2015,31(11):114-118.

[41]陳曉東,岳亞丹,李國輝,李大偉,楊潔,黃鋒林,魏取福.TGase交聯Zein/Casein復合納米纖維的制備及表征[J].化工新型材料,2015,43(11):59-61.

[42]王靜,王清清,呂鵬飛,魏取福,黃機質.光交聯聚乙烯醇-苯乙烯基吡啶鹽縮合物/細菌纖維素凝膠的制備與表征[J].高分子材料科學與工程,2015,31(10):180-184.

[43]蔡以兵,喬輝,魏取福,王樹根,王鴻博.輕化工程專業學科平臺課《高分子化學與物理》的教學改革實踐與大學生創新能力培養[J].教育教學論壇,2015,(43):83-84.

[44]杜冰,鄭來久,魏取福.響應面法優化糞產堿菌AlcaligenesfaecalisDL-08產纖維素酶培養工藝[J].工業微生物,2015,45(05):7-12.

[45]王靜,王清清,魏取福,蔡東照,黃機質.靜電紡PVDF/O-MMT膜對水面浮油吸附性能研究[J].化工新型材料,2015,43(10):98-100.

[46]王宏,逄增媛,張金寧,徐陽,魏取福.熔體靜電紡絲電場工藝參數對PET纖維膜形貌的影響[J].工程塑料應用,2015,43(09):44-48.

[47]李蔚,劉新金,徐伯俊,魏取福.牦牛絨與駱駝絨及羊絨的物理性能對比[J].紡織學報,2015,36(08):1-5.

[48]崔靜,王清清,魏取福.光交聯SbQ/蒙脫土插層復合材料的制備及表征[J].高分子材料科學與工程,2015,31(07):159-162.

[49]呂鵬飛,王清清,李國輝,魏取福.織物表面修飾細菌纖維素對碳纖維織物性能的影響[J].紡織學報,2015,36(07):50-54.

[50]徐文正,魏取福,鳳權,魏安方.FC/Ag有機無機共濺膜結構與性能研究[J].化工新型材料,2015,43(06):161-163.

[51]崔靜,董建成,趙明明,王清清,陳曉東,魏取福.光交聯Zein/PVA-SbQ復合納米纖維的制備及表征[J].功能材料,2015,46(10):10062-10065.

[52]崔靜,張平,魏取福.金屬配合納米纖維固定漆酶及其應用[J].化工新型材料,2015,43(05):258-260.

[53]杜冰,魏取福,鄭來久.基于靜電紡絲制備電氣石/海藻酸鈉/聚乙烯醇復合纖維[J].化工新型材料,2015,43(05):40-42.

[54]袁小紅,魏取福,陳東生,徐文正.滌綸機織物基納米金屬薄膜的AFM分析和紫外線防護性能[J].化工新型材料,2015,43(05):140-143.

[55]王宏,徐陽,聶清欣,李莘,魏取福.熔融靜電紡PCL自粘結超細纖維的制備[J].材料科學與工程學報,2015,33(02):235-240+273.

[56]陳曉東,岳亞丹,李大偉,楊潔,黃鋒林,魏取福.不同改性法對玉米醇溶蛋白納米纖維性能的影響[J].材料科學與工程學報,2015,33(02):241-245+250.

[57]付家鵬,羅磊,陳克,喬輝,魏取福.氧化鋅納米纖維的制備,、表征及電化學性能研究[J].電源技術,2015,39(04):749-752.

[58]許云飛,蘇楊帆,盧杭詣,黃鋒林,魏取福.同軸靜電紡絲法制備纖維素基復合納米纖維及其性能研究[J].化工新型材料,2015,43(04):55-57+60.

[59]劉亞芝,宗雪,蔡以兵,魏取福,劉偉.碳納米管(CNTs)的改性及其熔紡PLA復合纖維的結構與力學性能研究[J].化工新型材料,2015,43(04):107-110.

[60]宗雪,蔡以兵,譚鵬,魏取福,劉偉,劉慶年.靜電紡TiO_2-SiO_2復合納米纖維的制備及其光催化性能研究[J].水處理技術,2015,41(04):62-65+70.

[61]陳曉東,李大偉,李國輝,黃鋒林,魏取福.交聯玉米醇溶蛋白納米纖維膜對牛血清白蛋白的吸附性能研究[J].化工新型材料,2015,43(02):105-107.

[62]蔡以兵,孫桂巖,劉盟盟,王錦鵬,魏取福,劉偉.定形相變復合材料的研究進展——靜電紡絲法[J].高分子通報,2015,(02):18-25.

[63]劉盟盟,蔡以兵,靳子昂,魏取福,劉偉,劉慶年.聚乳酸/納米SiO_2復合纖維的制備及力學性能[J].材料導報,2015,29(02):96-100.

[64]邱玉宇,魏取福,王肖娜,蔡維維,徐陽.熔體靜電紡聚乳酸纖維膜的制備,、表征及細胞毒性評價[J].功能材料,2014,45(24):24119-24123.

[65]張金寧,李大偉,王清清,魏取福.一種基于靜電紡碳納米纖維的酚醛傳感器[J].材料導報,2014,28(24):99-102+114.

[66]王曉玲,逄增媛,柯惠珍,李大偉,羅磊,魏取福.靜電紡絲法制備GaInO_3納米纖維及其光學性能[J].材料科學與工程學報,2014,32(06):881-885+820.

[67]袁小紅,魏取福,陳東生,徐文正.磁控濺射工藝參數對滌綸機織物基納米金屬薄膜抗靜電性能的影響[J].材料科學與工程學報,2014,32(06):848-852.

[68]黃新民,孟靈靈,魏取福,葉志虓,張淼磊.基底結構對納米銅膜形貌結構及界面結合牢度的影響[J].上海紡織科技,2014,42(12):10-13.

[69]廖師琴,魏取福.PAN納米纖維的改性及其應用于吸附金屬離子[J].化工新型材料,2014,42(12):211-213.

[70]黃新民,孟靈靈,葉志虓,張淼磊,魏取福.表面磁控濺射納米銅膜滌綸基布的導電時效[J].上海紡織科技,2014,42(11):22-24.

[71]李學佳,黃加露,傅海洪,魏取福.亞胺化時間對電紡聚酰亞胺納米纖維結構和性能的影響[J].高分子材料科學與工程,2014,30(11):78-82.

[72]陳曉東,岳亞丹,李國輝,李大偉,羅磊,黃鋒林,魏取福.高水穩定性的ZEIN/CA復合納米纖維的制備及性能研究[J].功能材料,2014,45(20):20113-20117.

[73]黃鋒林,魏取福.紡織學科研究生國際化課程體系的構建與實踐[J].紡織服裝教育,2014,29(05):403-405.

[74]宗雪,孫桂巖,蔡以兵,喬輝,魏取福.SiO_2納米纖維的制備及其對亞甲基藍染料的吸附性能[J].化工新型材料,2014,42(09):138-140.

[75]范曉燕,袁霞,逄增媛,魏取福.磁控濺射法制備Cu-PANI/PA6復合納米纖維及其氨敏性能研究[J].化工新型材料,2014,42(09):125-128.

[76]王曉玲,逄增媛,柯惠珍,李大偉,羅磊,魏取福.中空多孔In_2O_3納米纖維的成型機理及光致發光性能研究[J].功能材料,2014,45(16):16096-16100+16106.

[77]夏鑫,李群華,周惠敏,魏取福,張向武.皮芯結構Sn/C包覆碳雜化納米纖維的制備及其在鋰離子負極材料中的應用[J].紡織學報,2014,35(08):1-4+14.

[78]夏鑫,牛瀟,周惠敏,魏取福.多孔SnO_2納米纖維的制備與表征[J].紡織學報,2014,35(07):13-17.

[79]王曉玲,蒲維瑋,逄增媛,羅磊,陳曉東,魏取福.靜電紡In_2O_3納米纖維的光致發光性能研究[J].人工晶體學報,2014,43(07):1645-1650.

[80]陳曉東,崔靜,岳亞丹,李國輝,李大偉,羅磊,黃鋒林,魏取福.負載納米金的玉米醇溶蛋白超細纖維的制備與表征[J].功能材料,2014,45(14):14118-14122.

[81]李學佳,傅海洪,王欣,魏取福.電紡聚酰胺酸/Fe_3O_4磁性納米復合纖維的制備與表征[J].功能材料,2014,45(10):10038-10040+10044.

[82]李學佳,王欣,魏取福.靜電紡絲法制備聚酰亞胺納米纖維及其表征[J].化工新型材料,2014,42(05):81-82+98.

[83]柯惠珍,逄增媛,宗雪,魏取福,蔡以兵,黃鋒林.負載脂肪酸酯的定形相變復合纖維的制備與性能研究[J].功能材料,2014,45(11):11051-11055.

[84]高春濤,蔡以兵,宗雪,李莘,魏取福,喬輝.TiO_2納米纖維摻雜熔紡PA6基復合長絲的制備及性能研究[J].功能材料,2014,45(06):6025-6030.

[85]王強,陳東生,魏取福,覃蕊.基于襪口材料彈性勢能預測襪口處平均壓強的方法[J].紡織學報,2014,35(03):121-126.

[86]羅磊,陳克,喬輝,崔靜,魏取福.多孔結構TiO_2納米纖維的制備及光催化性能研究[J].功能材料,2014,45(02):2101-2104+2109.

[87]段芳,張琴,魏取福,施冬健,陳明清.鉍系半導體光催化劑的光催化性能調控[J].化學進展,2014,26(01):30-40.

[88]高大偉,王麗麗,魏取福,王春霞,劉國亮.碳基復合納米纖維的制備與表征及其電容性[J].紡織學報,2014,35(01):20-24.

[89]蔡以兵,喬輝,王樹根,魏取福.輕化工程專業的《高分子化學與物理》課程教學方法初探[J].教育教學論壇,2013,(50):71-72.

[90]張平,王清清,張金寧,魏取福,崔靜.金屬配合纖維對漆酶固定化性能的研究[J].功能材料,2013,44(23):3442-3446.

[91]逄增媛,袁霞,王宏,徐陽,魏取福.Ag-PANI/PA6復合納米纖維的制備及其氨敏性能研究[J].化工新型材料,2013,41(10):71-74.

[92]杜遠之,徐陽,魏取福,王愛民,王宏,王肖娜.熔體靜電紡PA6超細纖維的制備與工藝研究[J].工程塑料應用,2013,41(10):38-41.

[93]李學佳,傅海洪,王欣,魏取福.靜電紡絲工藝參數對聚酰亞胺納米纖維形貌的影響[J].浙江紡織服裝職業技術學院學報,2013,12(03):19-22.

[94]張慧丹,黃鋒林,柯惠珍,張平,魏取福.負載TiO_2的PVDF膜的制備及其對水中CHCl_3的降解[J].化工新型材料,2013,41(09):37-39.

[95]王曉玲,魏取福,柯惠珍,黃鋒林,喬輝.In_2O_3納米纖維的制備及其導電性研究[J].化工新型材料,2013,41(08):36-38.

[96]孟靈靈,黃新民,魏取福.氧等離子體預處理對滌綸基納米銅膜性能影響[J].化工新型材料,2013,41(08):70-71+97.

[97]王肖娜,徐陽,堯谷軍,李莘,魏取福.聚乳酸的熔體靜電紡絲過程及工藝[J].高分子材料科學與工程,2013,29(08):141-145.

[98]孟靈靈,黃新民,魏取福.滌綸基布磁控濺射銅膜及其電磁屏蔽性能[J].印染,2013,39(16):1-5.

[99]王肖娜,李莘,王宏,徐陽,魏取福.熔體靜電紡絲研究進展[J].高分子通報,2013,(07):15-26.

[100]張平,張金寧,王清清,魏取福.聚丙烯腈/氧化石墨烯復合納米纖維的制備與性能研究[J].高分子通報,2013,(07):56-61.

[101]高翼強,董曉東,王欣,魏取福.皮芯型靜電紡絲制備多孔C/Ni復合納米纖維[J].天津工業大學學報,2013,32(03):24-27.

[102]張平,張金寧,廖師琴,魏取福,王清清.Fe-AO-PAN納米纖維催化劑的制備及其對活性橙K-GN染料降解的催化[J].化工新型材料,2013,41(05):156-158.

[103]李大偉,王清清,霍健,蔡以兵,魏取福,董曉東.表面引發聚合法制備PAN-FeCl_3/PPy皮芯結構納米纖維[J].化工新型材料,2013,41(04):42-44.

[104]孟靈靈,魏取福,黃新民.基底結構對納米銅膜光電性能影響[J].功能材料,2013,44(06):822-825+830.

[105]柯惠珍,李大偉,陳劍楊,魏取福,蔡以兵,黃鋒林.靜電紡復合相變纖維的制備與熱性能[J].高分子材料科學與工程,2013,29(02):155-158.

[106]孟靈靈,黃新民,魏取福.濺射功率對PET基表面沉積納米銅膜特性影響[J].化工新型材料,2013,41(02):112-114.

[107]高春濤,蔡以兵,王清清,魏取福,徐陽.TiO_2納米纖維的制備及其對染料的光催化降解性能[J].功能材料,2013,44(02):240-243+248.

[108]姚春梅,魏取福,許鳳鳳.非織造布表面處理對納米纖維分布及成型的影響[J].化工新型材料,2013,41(01):73-75+82.